Hello!

Did you know that logged in users can see a lot more content?

All videos

July 10, 2018 by Tekla User Assistance

In this How do I series video we will look at working with templates.
You can create a template file as a common starting point to avoid repetition of...

June 18, 2018 by Tekla User Assistance

In this How do I series video we will look at working with Sub structure views.
A sub structure is a view containing a selection of elements, thus...

March 14, 2018 by Tekla User Assistance

Cast-in-place slab designs are becoming more challenging as architects push for thinner slabs and larger column spacings. Engineers are asked to push the...

February 20, 2018 by Tekla User Assistance

Tekla Structural Designer 2018 has added the ability to export column base plates and beam-beam and beam-column moment connections to Tekla Connection...

February 20, 2018 by Tekla User Assistance

Tekla Structural Designer can design portal frames using an elastic analysis. An elastic-plastic design is often preferred.
Tekla Structural Designer...

February 20, 2018 by Tekla User Assistance

This video demonstrates the new Tekla Structural Designer 2018 link to allow timber members specified within a model file to be designed using Tekla Tedds...

February 20, 2018 by Tekla User Assistance

This video demonstrates the new rigorous slab deflection feature in Tekla Structural Designer 2018.
The basic workflow is very simple. The underlying...

February 06, 2018 by Tekla User Assistance

This is the last of four videos dealing with the specific integration between Tekla Structural Designer and Tekla Structures. In this lesson you will learn...

February 06, 2018 by Tekla User Assistance

This is the third of four videos dealing with the specific integration between Tekla Structural Designer and Tekla Structures. In this lesson you will learn...

February 06, 2018 by Tekla User Assistance

This is the second of four videos dealing with the specific integration between Tekla Structural Designer and Tekla Structures. In this lesson you will...

February 06, 2018 by Tekla User Assistance

This is the first of four videos dealing with the specific integration between Tekla Structural Designer and Tekla Structures. In this lesson you will learn...

February 01, 2018 by Tekla User Assistance

This is the last of four videos dealing with the specific integration between Tekla Structural Designer and Autodesks Revit platform. In this lesson you...

February 01, 2018 by Tekla User Assistance

This is the third of four videos dealing with the specific integration between Tekla Structural Designer and Autodesks Revit platform. In this lesson you...

February 01, 2018 by Tekla User Assistance

This is the second of four videos dealing with the specific integration between Tekla Structural Designer and Autodesks Revit platform. In this lesson you...

February 01, 2018 by Tekla User Assistance

This is the first of four videos dealing with the specific integration between Tekla Structural Designer and Autodesks Revit platform. In this lesson you...

February 01, 2018 by Tekla User Assistance

This is the last of four videos dealing with the fundamentals of BIM Integration from Tekla Structural Designer. In this lesson you will learn about the...

February 01, 2018 by Tekla User Assistance

This is the third of four videos dealing with the fundamentals of BIM Integration from Tekla Structural Designer. In this lesson you will learn about the...

February 01, 2018 by Tekla User Assistance

This is the second of four videos dealing with the fundamentals of BIM Integration from Tekla Structural Designer. In this lesson you will learn the...

February 01, 2018 by Tekla User Assistance

This is the first of four videos dealing with the fundamentals of BIM Integration from Tekla Structural Designer. In this lesson you will learn a general...

October 25, 2017 by Tekla User Assistance

This is the final video in a series of five, looking at how to define snow loading.

Part 5 walks through the Update Snow and the...

October 25, 2017 by Tekla User Assistance

This video is the fourth of five parts looking at how to define snow loading.

Part 4 walks through the Local Drift Snow command.

October 25, 2017 by Tekla User Assistance

This video is the third of five parts looking at how to define snow loading.

Part 3 walks through the drifted Valley Snow command....

October 25, 2017 by Tekla User Assistance

This video is the second of five parts looking at how to define snow loading.

Part 2 walks through the Drifted Uniform Snow command...

October 25, 2017 by Tekla User Assistance

This video is the first of five parts looking at how to define snow loading.

Part 1 walks through the Snow Wizard... command to...

July 18, 2017 by Tekla User Assistance

In this short video we will introduce you to the Cutting Plane command. A useful tool for working on a smaller area of the model.

April 28, 2017 by Tekla User Assistance

In this short video you will learn how to apply a variable patch load to a roof panel.

March 22, 2017 by Tekla User Assistance

Tekla Structural Designer 2017 introduces a host of new features to help save you time and increase your productivity.

Watch the overview video to...

December 08, 2016 by Tekla User Assistance

The modelling, analsysis and design of piles and pile caps in Tekla Structural Designer

December 08, 2016 by Tekla User Assistance

The modelling, analsysis and design of mat foundations in Tekla Structural Designer

December 08, 2016 by Tekla User Assistance

The application of site specific spectra to a seismic analysis

December 08, 2016 by Tekla User Assistance

The modelling, analysis and design of cold rolled/formed hollow sections in Tekla Structural Designer

December 08, 2016 by Tekla User Assistance

The modelling, analysis and design of Pre Cast Concrete sections in Tekla Structural Designer

December 08, 2016 by Tekla User Assistance

The use of property sets in modelling in Tekla Structural Designer

December 08, 2016 by Tekla User Assistance

The use of Universal Design Attributes (UDA's) in modelling in Tekla Structural Designer

October 10, 2016 by Tekla User Assistance

See how to copy loads around the model and between loadcases.

October 10, 2016 by Tekla User Assistance

How to apply multibay roof panel properties to Eurocode and BS wind models

October 03, 2016 by Tekla User Assistance

How to run Static Floor Vibration Checks to SCI P354

September 21, 2016 by Tekla User Assistance

See how you can synchronize models confidently throughout the project lifecycle. Discover how to use auditing tools to highlight exactly what has been added...

September 13, 2016 by Tekla User Assistance

See how to create loadcases and load combinations and also apply loads to a steel model.

September 13, 2016 by Tekla User Assistance

See how to create loadcases and load combinations and also apply loads to a concrete model.

September 13, 2016 by Tekla User Assistance

See how to create roof panels.

September 13, 2016 by Tekla User Assistance

See how to create a steel truss.

September 13, 2016 by Tekla User Assistance

See how to create openings in slabs.

September 13, 2016 by Tekla User Assistance

See how to create concrete slabs supported on steel beams.

September 13, 2016 by Tekla User Assistance

See how to create concrete flat slabs.

September 13, 2016 by Tekla User Assistance

See how to create steel beams.

September 13, 2016 by Tekla User Assistance

See how to create concrete beams.

September 13, 2016 by Tekla User Assistance

See how to rotate, zoom and pan a model in the Structure View.

September 13, 2016 by Tekla User Assistance

See how to create concrete walls and columns.

September 13, 2016 by Tekla User Assistance

See how to create steel columns

September 13, 2016 by Tekla User Assistance

How to generate, modify and filter reports in Tekla Structural Designer

September 13, 2016 by Tekla User Assistance

How to automatically generate ASCE 7 wind loads in Tekla Structural Designer.

September 13, 2016 by Tekla User Assistance

How to run static floor vibration checks to AISC Design Guide 11

September 13, 2016 by Tekla User Assistance

A brief introduction to foundation design in TSD

September 13, 2016 by Tekla User Assistance

See how the new flexible infill command can help you speed up the creation of your model.

September 13, 2016 by Tekla User Assistance

Learn how to design ASD Westok Beams within Tekla Structural Designer and how to link directly to the Cellbeam software

September 13, 2016 by Tekla User Assistance

Tekla Structural Designer automatically calculates wind loading for you and applies it instantly to your model.
See the enhancements made to help you...

September 13, 2016 by Tekla User Assistance

Extended seismic design and detailing features now allows you to consider the full design of concrete buildings in higher earthquake regions
Watch the...

September 13, 2016 by Tekla User Assistance

With Tekla Structural Designer 2016 you can now design isolated pad and strip footing all part of the same model.
See how in this short video

September 13, 2016 by Tekla User Assistance

Tekla Structural Designer 2016 introduces a host of new features to help save you time and increase your productivity.
Watch the first of a series of...

September 13, 2016 by Tekla User Assistance

See how to create a infill beams.

September 13, 2016 by Tekla User Assistance

See how to set up a company page header and footer

September 13, 2016 by Tekla User Assistance

When working to the Singapore Head Code - see how to run the Seismic Wizard and perform RSA Design.

September 13, 2016 by Tekla User Assistance

See how to batch design all the steel members in a model for all static combinations.

September 13, 2016 by Tekla User Assistance

See how to batch design all the concrete members in a model for all static load combinations.

September 13, 2016 by Tekla User Assistance

Watch the attached video to learn how to align columns graphically to grids

September 13, 2016 by Tekla User Assistance

An introduction to a number of View features including: how to open views and change view modes; how to use Scene Content to control the display; how to...

September 13, 2016 by Tekla User Assistance

See how to use the Help System most effectively.

September 13, 2016 by Tekla User Assistance

See how to create reports for a steel model.

September 13, 2016 by Tekla User Assistance

See how to create reports for a concrete model.

September 13, 2016 by Tekla User Assistance

See how to create concrete schedules and slab detail drawings.

September 13, 2016 by Tekla User Assistance

See how to create steel drawings.

September 13, 2016 by Tekla User Assistance

See how to create concrete detail drawings.

September 13, 2016 by Tekla User Assistance

See how to design concrete flat slabs.

September 13, 2016 by Tekla User Assistance

See how to interactively design members in a concrete model.

September 13, 2016 by Tekla User Assistance

See how to display the Load Analysis View for members in a steel model.

September 13, 2016 by Tekla User Assistance

See how to display the Load Analysis View for members in a concrete model.

September 13, 2016 by Tekla User Assistance

See how to review the analysis results for a steel model.

September 13, 2016 by Tekla User Assistance

See how to review the analysis results for a concrete model.

September 13, 2016 by Tekla User Assistance

See how to review the design of a steel model.

September 13, 2016 by Tekla User Assistance

See how to review the design of a concrete model.

September 13, 2016 by Tekla User Assistance

See how to batch design all the steel members in a model.

September 13, 2016 by Tekla User Assistance

See how to batch design all the concrete members in a model.

September 13, 2016 by Tekla User Assistance

See how to select objects, delete objects, and control Scene Content

September 13, 2016 by Tekla User Assistance

See how to create loadcases and load combinations and also apply loads to a steel model.

September 13, 2016 by Tekla User Assistance

See how to create steel columns.

September 13, 2016 by Tekla User Assistance

Defining a grid layout using the Rectangular Wizard.

September 13, 2016 by Tekla User Assistance

Adding a new grid line into an existing grid layout.

September 13, 2016 by Tekla User Assistance

Defining default Model Settings for a new model and setting up Construction Levels.

September 13, 2016 by Tekla User Assistance

See how you can align columns to grid lines

September 13, 2016 by Tekla User Assistance

See how you can synchronize models confidently throughout the project lifecycle. Discover how to use auditing tools to highlight exactly what has been added...

September 13, 2016 by Tekla User Assistance

Generate reports and drawings quickly and efficiently directly from your model. You will see how easy it is to export your calculations and provide a wide...

September 13, 2016 by Tekla User Assistance

See how Tekla Structural Designer automates all the analysis for you. We will demonstrate how transparent the results are, so you can stay in total control...

September 13, 2016 by Tekla User Assistance

Discover how you can save significant design time with automated wind loading.

September 13, 2016 by Tekla User Assistance

See how fast and intuitive it is to create multi-material models.

September 13, 2016 by Tekla User Assistance

What's new in Tekla Structural Designer 2016i