Tekla License Service update April (b) 2020 (v3.01.1000)

Last updated April 29, 2020 by Tekla User Assistance tekla.documentation@trimble.com

Tekla License Service update April (b) 2020 (v3.01.1000)

Please note:

These updates are only required if you are using a Tekla Online license and consequently are only required on your client machine

Both the 32-bit & the 64-bit version of this patch are required

This will upgrade your Tekla Structural License Service to 3.01.1000

Tekla Online Licensing

[TEDDS-4546]1 Fixed very high network traffic if the device's system clock time was greater than 10 minutes incorrect because the license was refreshing continuously. System clocks which are up to ten minutes incorrect will now be accounted for however if the system clock is more than ten minutes incorrect then an error will be reported and the license cannot be used.

[TEDDS-4571]1 Fixed error "You cannot use this license. The license has been activated on device XXXX-XX with a different Trimble Id" when the identified device is this device or the license has never been used before.

Footnotes

1 This number is an internal reference number and can be quoted to your local Support Department should further information on an item be required.

Content rating: 
No votes yet