Release notes

Tekla Structural Designer Integrator July 2020 updates

New Version Tekla Structural Designer Integrator for Autodesk Revit© 2021 (version 7.0) Tekla Structural Designer Integrator is now fully compatible with the Autodesk Revit© 2021 package. Integration with regards to imports, exports and merges into this platform are now available and includes the updates listed below. Updates The following topics highlight the changes and enhancements in Tekla Structural Designer Integrator for Autodesk Revit© 2020 version 6.01 Tekla Structural Designer Integrator for Autodesk Revit© 2019 version 5.02 Tekla Structural Designer Integrator for Autodesk Revit©
by Tekla Structural Designer Development Team
0
  • Autodesk Revit 2021
  • Autodesk Revit 2020
  • Autodesk Revit 2019
  • Autodesk Revit 2018

Tekla Structural Designer 2020 release notes

Tekla Structural Designer 2020 release notes Welcome to Tekla Structural Designer 2020! Select your headcode/region from the list below to see the many new features and improvements that apply to you in this version:   US Issues with Associated Bulletins [TSD-6440] - Snow Loading - US Head Code & ASCE 7-2016 - for Roof Projection and Parapet Snow Drift loads to Cl.7.8 of ASCE7-16, the Importance factor value was used directly in the calculation of the drift height hd rather than its square root per the equation of Figure 7.6-1. This could produce unconservative drift load values
by Tekla User Assistance
5
  • release notes
  • software release notes

Tekla Portal Frame Designer 20 & Tekla Connection Designer 20 Release notes

Important If you intend to use either Tekla Portal Frame Designer and/or Tekla Connection Designer program and wish to INTEGRATE with Tekla Structural Designer it is highly recommended the corresponding version of Tekla Structural Designer is installed. Installation & licensing This release will upgrade your Tekla Portal Frame Designer & Tekla Connection Designer installation to version number 20.0.0.0 and should be installed to ensure optimum function of the program. Licensing: New Licenses - Tekla Portal Frame Designer 20 & Tekla Connection Designer 20 will require the
by Tekla Structural Designer Development Team
0

Tekla Structural Design Suite 2020 Release notes

The Complete Structural, Analysis, Design and Calculation Suite: Tekla Structural Design Suite combines Tekla Tedds & Tekla Structural Designer delivering a single high-value easy-access subscription. The only subscription an engineer performing structural analysis and calculations will need. Release notes and system requirements for each application that is part of the suite can be found below: View the Tekla Structural Designer 2020 release notes View the Tekla Structural Designer 2020 system requirements View the Tekla Tedds 2020 release notes View the Tekla Tedds 2020 system
by Tekla Structural Designer Development Team
5

Tekla Structural License Service (3.00)

Now includes the May 2020 update This installer now includes Tekla Structural License Service 3.1.2 released May 2020 ⚠  Please be aware that the 2020 Analysis & Design Product Releases (comprising Tekla Structural Designer, Tekla Tedds, Tekla Portal Frame Designer and Tekla Connection Designer) will include a new version of the Tekla Structural License Service.  For Server licensing using Sentinel RMS, your License Server MUST be updated with this new version before installing the 2020 Releases.  This update is not optional - if it is not performed, server licensing will not work
by Tekla Structural Designer Development Team
1

Tekla Portal Frame Designer 19i & Tekla Connection Designer 19i release notes

Important If you intend to use either Tekla Portal Frame Designer and/or Tekla Connection Designer program and wish to INTEGRATE with Tekla Structural Designer it is highly recommended the corresponding version of Tekla Structural Designer is installed. Installation & licensing This release will upgrade your Tekla Portal Frame Designer & Tekla Connection Designer installation to version number 19.1.0.0 and should be installed to ensure optimum function of the program. Licensing: New Licenses - No new license is required for this version. License Server - License Server Version - for
by Tekla Structural Designer Development Team
5

Tekla Structural Designer 2019i Release Notes

This release will install Tekla Structural Designer version number 19.1.0.x and should be installed to ensure optimum function of the program. No prior installation of Tekla Structural Designer is required. The release includes a number of significant new features together with several enhancements and issue resolutions as detailed below. If you are updating from a version earlier than Tekla Structural Designer 2019 SP4 (version 19.0.4.00) you can find details of enhancements and fixes included in all previous releases in Tekla User Assistance (TUA) and Tekla Downloads via the links below:
by Tekla Structural Designer Development Team
4.666665

Tekla Structural Designer Integrator June 2019 updates

New Version Tekla Structural Designer Integrator for Autodesk Revit© 2020 (version 6.0) Tekla Structural Designer Integrator is now fully compatible with the Autodesk Revit© 2020 package. Integration with regards to imports, exports and merges into this platform are now available and includes the updates listed below.   Updates The following topics highlight the changes and enhancements in Tekla Structural Designer Integrator for Autodesk Revit© 2019 version 5.01 Tekla Structural Designer Integrator for Autodesk Revit© 2018 version 4.02 Tekla Structural Designer Integrator for Autodesk
by Tekla User Assistance Team
5
  • Autodesk Revit 2020
  • Autodesk Revit 2019
  • Autodesk Revit 2018
  • Autodesk Revit 2017

Tekla Structural License Service (2.06)

The Tekla Structural License Service allows you to share and manage your licenses. It also allows users to commute licenses and report on license activity. At the Server Download and run the Tekla Structural License Service installation file Follow the on-screen prompts to install the ‘License Server’ and ‘License Server Manager’ You can now launch the License Server Manager and activate your licenses If you do not have a separate computer which will act as the license server or your computer is not connected to a network then the license server software can be installed on the same computer
by Tekla Structural Designer Development Team
5

Tekla Portal Frame Designer 19 & Tekla Connection Designer 19 release notes

Important If you intend to use either Tekla Portal Frame Designer and/or Tekla Connection Designer program and wish to INTEGRATE with Tekla Structural Designer you will need to ensure the corresponding version of Tekla Structural Designer is installed. Installation & licensing This release will upgrade your Tekla Portal Frame Designer & Tekla Connection Designer installation to version number 19.0.0.0 and should be installed to ensure optimum function of the program. Licensing: New Licenses - Tekla Portal Frame Designer 19 & Tekla Connection Designer 19 will require the
by Tekla Structural Designer Development Team
5

Tekla Structural Designer 2019 release notes

Updated Installer The installer now includes Tekla Structural Designer Service Pack 2 This release will install Tekla Structural Designer version number 19.0.0.104 and should be installed to ensure optimum function of the program. No prior installation of Tekla Structural Designer is required. The release includes a number of significant new features together with several enhancements and issue resolutions as detailed below. If you are updating from a version earlier than Tekla Structural Designer 2018i SP3 (version 18.1.3.43) you can find details of enhancements and fixes included in all
Requires Tekla Maintenance
by Tekla Structural Designer Development Team
5

Tekla Structural Designer 2018i Service Pack 3

This release will upgrade your Tekla Structural Designer installation to version number 18.1.3.43 and should be installed to ensure optimum function of the program.   It includes a number of enhancements and issue resolutions as detailed below.  If you are upgrading from a version earlier than Tekla Structural Designer 2018i SP2 (version 18.1.2.41) you can find details of requirements, enhancements and fixes included in all previous releases in Tekla User Assistance (TUA) and Tekla Downloads via the links below: Tekla User Assistance Main version release notes Tekla User Assistance Service
by Tekla Structural Designer Development Team
5

Tekla Portal Frame Designer 18i & Tekla Connection Designer 18i release notes

Re-released This installation has been re-released to resolve the following: Fixed: Failure to install 18i if version 18 had any Service Pack installed. If you downloaded Tekla Portal Frame Designer 18i or Tekla Connection Designer 18i prior to 19th September 2018 and are experiencing an issue please download and install the latest version Important If you intend to use either Tekla Portal Frame Designer and/or Tekla Connection Designer program and wish to INTEGRATE with Tekla Structural Designer you will need to ensure Tekla Structural Designer 2018i is installed. Installation &
by Tekla Structural Designer Development Team
5

Tekla Structural Designer 2018i release notes

This release will upgrade your Tekla Structural Designer installation to version number 18.1.0.45 and should be installed to ensure optimum function of the program.   It includes a number of significant new features together with several enhancements and issue resolutions as detailed below.  If you are upgrading from a version earlier than Tekla Structural Designer 2018 SP4 (version 18.0.4.9) you can find details of enhancements and fixes included in all previous releases in Tekla User Assistance (TUA) and Tekla Downloads via the links below: Tekla User Assistance Main version release notes
by Tekla Structural Designer Development Team
5

Tekla Structural Designer Integrator July 2018 updates

Tekla Structural Designer Integrator for Autodesk Revit© Tekla Structural Designer Integrator is now fully compatible with the Autodesk Revit© 2019 package. Integration with regards to imports, exports and merges into this platform are now available. The following topics highlight the changes and enhancements in Tekla Structural Designer Integrator for Autodesk Revit© 2019 version 5.0. Tekla Structural Designer Integrator for Autodesk Revit© 2018 version 4.01. Tekla Structural Designer Integrator for Autodesk Revit© 2017 version 3.03.  For fixes and enhancements included in versions prior
Requires Tekla Maintenance
by Tekla Structural Designer Development Team
5

Tekla Portal Frame Designer 18 & Tekla Connection Designer 18 release notes

Update - 02/05/2018 The main installation package now includes Service Pack 1 and also the Admin install option required for Distributed Deployment Important Tekla Portal Frame Designer 18 & Tekla Connection Designer 18 ship as part of Fastrak 18, however, you ONLY need to upgrade IF YOU INTEND TO use either Portal Frame Design and/or Connection Design program and wish to INTEGRATE with Tekla Structural Designer.  Installation & licensing If you haven't already received your Tekla Portal Frame Designer 18 & Tekla Connection Designer 18 Product Activation Keys (PAK) then please
by Tekla User Assistance Team
1

Tekla Structural Designer 2018 release notes

Update With the release of Tekla Tedds 2018, Tedds Engineering Library (March 2018) update, the new Tekla Structural Designer > Tekla Tedds Timber Design Calculation link can be used to design timber members in a Tekla Structural Designer model (for the Eurocode headcode). For how to use the link please see the Tekla Structural Designer Tekla User Assistance video Timber design using the Design using Tekla Tedds Export feature. This release will upgrade your Tekla Structural Designer installation to version number 18.0.0.33 and should be installed to ensure optimum function of the
by Tekla User Assistance Team
4.333335

Tekla Structural License Service (2.04)

Updated - June 2018 Now includes a very specific and minor issue related to Tekla Tedds 2018 and Windows 10 April 2018 update Updated - April 2018 This version was initially released in January 2018 and has been re-released in April 2018 to include a very minor update associated with server report generation. The Tekla Structural License Service allows you to share and manage your licenses. It also allows users to commute licenses and report on license activity. At the Server Download and run the Tekla Structural License Service installation file Follow the on-screen prompts to install
by Tekla User Assistance Team
5

Tekla Structural Designer 2017i release notes

Please note It is intended that Tekla Structural Designer 2017i will be the final version that supports 32-bit operating systems. Read more. This release will upgrade your Tekla Structural Designer installation to version number 17.1.0.64 and should be installed to ensure optimum function of the program.   It includes a number of significant new features together with several enhancements and issue resolutions as detailed below.  Update: 18th January 2018 The release now includes Service Pack 3 and will upgrade your installation to version 17.1.3.84. Please read the related Service Pack
by Tekla Structural Designer Development Team
3.533335

Tekla Structural Designer Integrator for Autodesk Revit 2018

Support for Autodesk Revit© 2018 platform The Tekla Structural Designer Integrator (version 4.0) is now fully compatible with the Autodesk Revit© 2018 package. Integration with regards to imports, exports and merges into this platform are now available. Please note: Although this version will work with older instances of Tekla Structural Designer, we recommend you use the latest version of Tekla Structural Designer to ensure optimum compatibility.
by Tekla User Assistance Team
3.35294

Pages